Desværre, så sender vi ikke til dit land

SERVICE CHAT TALK TO THE PEOPLE THAT BUILD YOUR BIKE:

CHAT IS NOT AVAILABLE RIGHT NOW. WE WILL BE BACK ONLINE SOON.

Vores service center er åbent igen i morgen kl. 09:00. Send os venligst en e-mail.
Sværhedsgrad: Svært
Disse opgaver henvender sig til erfarne og dygtige mekanikere, der har stor erfaring mht. sportscykler. Disse opgaver kræver ofte værktøj, der kræver ekspertise at bruge, så som kassette aftager, momentnøgle og pedalnøgle.
Værktøjer:

Change chain Mountainbike

This is how you change most Shimano chains:

1. Position the chain tool onto the chain. Push the rivet through the link plate. (Do not push the rivet completely out! It should remain connected to one of the link plates. If it is pushed out completely it can be very difficult to get it back in again!)

2. Move the chain links back and forth to separate them from each other.

3. A new chain is always too long at first and needs to be shortened. You can determine the correct length of the chain by observing the following rule of thumb. Shift down onto the smallest sprocket and the smallest front chain ring. Position the new chain over the smallest chain ring and sprocket and feed it through the rear and front derailleur cages. Now pull the two unconnected chain links together. The chain is of the correct length when the rear derailleur cage is aligned parallel to the chain. It is also possible to simply use your old chain as a guide to ascertaining the correct chain length.

4. If the new chain is too long, remove more links until you achieve the length you require.

5. Now pull the two unconnected chain links together. Push the protruding rivet through the link plates using the chain tool. The ends of the rivet should protrude out of both sides of the link plate equally.

Tip: Move the link you have just connected with the tool up and down to free it completely so that you don’t get a stiff link.

Your chain must be properly riveted, as it would otherwise tear under stress.

Canyon søger hele tiden at sikre kvaliteten og opdatere information, der er tilgængeligt i vores Technical Support Center. Alle reparationer og justeringer du foretager på din cykel er helt på egen risiko. Hvis du er tvivl om, hvad du skal gøre. så bør du sende din cykel til Canyon eller en anden kvalificeret specialist. Canyon giver ingen garantier og kan ikke holdes ansvarlig for informationen tilgængeligt i dette Technical Support Center.


Hjalp denne artikel dig?JaNej

Pure Cycling.