Desværre, så sender vi ikke til dit land

SERVICE CHAT TALK TO THE PEOPLE THAT BUILD YOUR BIKE:

CHAT IS NOT AVAILABLE RIGHT NOW. WE WILL BE BACK ONLINE SOON.

Vedr. spørgsmål: Vores service center er åbent fra kl. 09:00. Du kan ringe til os på 70204011, eller sende os en e-mail.
Sværhedsgrad: - Lignende emner:

Exchange and compatibility of dampers

In principle, it is possible to exchange the shock on every Canyon mountain bike. The new shock must have the same compression length and the same fitting length as the old one. Check at any rate that the damper has enough space to move at any possible position. The bushing size for all Canyon bikes is Canyon ist 8x22,2 mm.

The fitting length of the shock is measured from the exact center of each of the shock eyes.

If you do decide to change your shock, then you will require new bushings from the relevant shock manufacturer.

The Nerve bushing size is M8x35.0mm.

Originally assembled dampers on the Canyon Strive can not be replaced or changed by any other damper whatsoever!

If the damper has a piggy back make sure that the piggy back does not touch the frame or any other part of the bicycle under no matter how far the damper is deflected.

Canyon søger hele tiden at sikre kvaliteten og opdatere information, der er tilgængeligt i vores Technical Support Center. Alle reparationer og justeringer du foretager på din cykel er helt på egen risiko. Hvis du er tvivl om, hvad du skal gøre. så bør du sende din cykel til Canyon eller en anden kvalificeret specialist. Canyon giver ingen garantier og kan ikke holdes ansvarlig for informationen tilgængeligt i dette Technical Support Center.


Hjalp denne artikel dig?JaNej

Pure Cycling.