Unfortunately, we do not ship to your country.

SERVICE CHAT TALK TO THE PEOPLE THAT BUILD YOUR BIKE:

CHAT IS NOT AVAILABLE RIGHT NOW. WE WILL BE BACK ONLINE SOON.

Please contact our Servicecenter. We are available today until 19:00 CET: +49 261 40 4000
Difficulty: - Similar Topics: Print Article

Exchange and compatibility of dampers

In principle, it is possible to exchange the shock on every Canyon mountain bike. The new shock must have the same compression length and the same fitting length as the old one. Check at any rate that the damper has enough space to move at any possible position. The bushing size for all Canyon bikes is Canyon ist 8x22,2 mm.

The fitting length of the shock is measured from the exact center of each of the shock eyes.

If you do decide to change your shock, then you will require new bushings from the relevant shock manufacturer.

The Nerve bushing size is M8x35.0mm.

Originally assembled dampers on the Canyon Strive can not be replaced or changed by any other damper whatsoever!

If the damper has a piggy back make sure that the piggy back does not touch the frame or any other part of the bicycle under no matter how far the damper is deflected.


Canyon consistently strives to ensure the quality and accuracy of the information contained in this Technical Support Center. Any repairs or adjustments which you carry out on your bike are entirely at your own risk. If you are in any doubt about what to do, you should send your bike to Canyon or take it to another qualified repair specialist. Canyon gives no guarantee or accepts no liability for the any of the information contained in this Technical Support Center.

Did this article help you?YesNo

Pure Cycling.