Unfortunately, we do not ship to your country.
see our shipping destinationsOur Servicecenter is available today from 08:00. You can reach us on +49 261 40 4000 or send us an e-mail.
- Setting of rebound
- Dismantle Fox damper
- Adjusting of spring elements
- Adjusting of SAG
- Recommended service intervals for Fox spring elements
- Leakage and Noises from Spring Elements
- Adjusting of compression and platform
- Adjusting of coil preload
- Setting of RockShox DualAir forks
- Adjusting of bottom out valve on Fox DHX damper
Difficulty: -
Print Article
Stuck suspension fork
The suspension elements require a certain period of running in. It can occur that forks compress and rebound erratically over the first 150 to 200km of use. This is mainly due to the very tight fitting of the dirt seal. These seals force dirt off the dip tubes during the compression phase. Bild 1
If the fork continues to rebound erratically after 200km, please contact our Service Center +49 (0) 261 40 4000 or via e-mail at info@canyon.com
Canyon consistently strives to ensure the quality and accuracy of the information contained in this Technical Support Center. Any repairs or adjustments which you carry out on your bike are entirely at your own risk. If you are in any doubt about what to do, you should send your bike to Canyon or take it to another qualified repair specialist. Canyon gives no guarantee or accepts no liability for the any of the information contained in this Technical Support Center.
Dirt seal on a suspension fork
