Infelizmente não efetuamos envios para o seu país.

veja os nossos destinos de envio

Por favor contacte o nosso Service Center. Estamos disponíveis até às 17h00: +351 922 127 885

Dificuldade: Fácil
Estas tarefas são fáceis para qualquer amante do ciclismo. Para as executar, o utilizador não necessita nenhuma ferramenta, ou apenas irá necessitar de ferramentas padrão como chaves Allen, desmontas, ou chaves de parafusos. Nesta secção irá encontrar informação sobre como efetuar pequenos ajustes na sua bicicleta.
Ferramentas: Tópicos Semelhantes: Imprimir Artigo

Remedy for cracking sounds and noises

Este artigo em português

Noises can occur where parts join, for example on weld seams or screw joints. Carbon fibre frames might emit very loud noises, although these can normally be located and eliminated very quickly and easily.

1. Pedals


Disassemble the pedals and apply grease to the threads.
Picture 1 Re-tighten the pedals after the first ride. You need to check, if the screws of the shoe-cleats are tightened with the correct torque. Apply some grease to the cleats and replace worn out cleats at an early stage. If the pedals have screws, apply some grease to this contact point to avoid creaking.Picture 2

You need to replace worn out cleats at an early stage.

2. Quick Releases


Make sure that the quick releases are closed and tightened with sufficient force.
Picture 3 Make sure that through axles are correctly closed and greased.

3. Saddle and Seatpost


Check if the seat clamp is tightened with the correct torque. You should check as well if the seat post is sufficiently inserted into the seat tube. There should be enough grease on the post if frame and post are made of aluminium. If the seatpost or frame are made of carbon fibre, do not apply grease to either of these components. Instead, use carbon assembly paste.

You need to check the head of the seatpost as well.
Picture 4 Seatposts with a head made of titanium are liable to creaking sounds. You can prevent noises by spraying wax on this contact point.

4. Rear Derailleur Hanger


The rear derailleur hanger is often the source of noises. Dismantle the hanger and apply grease to the contact surfaces.
Picture 5

5. Cockpit


Check if stem, brake levers, and gear shifters are tightened with the correct torque. Only apply carbon assembly paste to parts which are made of carbon fibre.
Picture 6

If your shift cables are positioned inside the frame, there might be noise from the point where the cables enter the frame. Apply some grease to these contact points.

7. Bottle and Bottle Holder


Check if the bottle cage screws are tightened with the correct torque.

8. Chainring Screws


Check if the chainring screws are tightened with the correct torque as well.
Picture 7

Ensure that all bolts and screws are tightened to the correct torque. The correct torque is indicated on the component itself, in the bike manual provided with your new bike, or here in the Technical Support Center. .

In many cases, noises can come from defects on the frame or fitted components. Check your entire bike carefully for cracks or other damage.

A Canyon procura regulamente assegurar a qualidade e fiabilidade da informação constante no Centro de Apoio Técnico. Qualquer reparação ou ajuste levado a cabo na sua bicicleta é da sua inteira responsabilidade e risco. Caso tenha dúvidas na execução de alguma tarefa, deverá contactar uma pessoa qualificada para efetuar a reparação, dentro ou fora da Canyon. A Canyon não oferece qualquer garantia nem aceita qualquer responsabilidade sobre qualquer informação contida no Centro de Apoio Técnico.



Picture 1: Apply grease to the thread on the cranks

Picture 1: Apply grease to the thread on the cranks

Picture 2: Apply grease to the click pedals

Picture 2: Apply grease to the click pedals

Picture 3: The quick releases must be correctly tightened

Picture 3: The quick releases must be correctly tightened

Picture 4: Check if the screws on the saddle railings are correctly tightened

Picture 4: Check if the screws on the saddle railings are correctly tightened

Picture 5: Apply grease to the rear derailleur hanger

Picture 5: Apply grease to the rear derailleur hanger

Picture 6: Check the screws on the stem

Picture 6: Check the screws on the stem

Picture 7: Check if the chainring screws are correctly tightened

Picture 7: Check if the chainring screws are correctly tightened

Este artigo ajudou-o?simnão