Unfortunately, we do not ship to your country.

SERVICE CHAT TALK TO THE PEOPLE THAT BUILD YOUR BIKE:

CHAT IS NOT AVAILABLE RIGHT NOW. WE WILL BE BACK ONLINE SOON.

We are available again on Monday from 08:00. Send us an e-mail.
Difficulty: easy
These jobs are easy for anyone interested in cycling. For this workshop the user either doesn’t need any tools at all, or he only requires standard tools such as Allen keys, pliers or screw drivers. In this category you’ll find above all how to perform adjustments to your bike
Similar Topics: Print Article

Adjust Shimano Di2 Gearshift

1. Battery charge status:

Press a rocker switch on the brake handle and hold it for one second. Picture 1
The battery charge status can be checked using the diode on the cockpit junction box.

100 % Green light (2 seconds)
50 % Green light flashes (5 times)
25 % Red light (2 seconds)
0 % Red light flashes (5 times)


Picture 2
Picture 3

2. Charge battery:

Connect the charging cable to the small connector in the cockpit junction box. The connector is protected by a plastic cover.

Picture 4

As the battery charge falls it will first become impossible to use the front derailleur and then the rear derailleur will fail. If the battery is fully discharged the front or rear derailleur will stop in the last set position. If the red battery indicator light is lit, we recommend that you charge the battery as soon as possible.

3. Safety function

The safety function will be triggered by a heavy impact and the connection between the motor and the arm will be temporarily broken thus shutting down the rear derailleur. This is designed to protect the system, for example in the event of a fall.
If this happened, press the button on the cockpit junction box for 5 seconds or more. This re-establishes the connection between the motor and the arm and resets the gear safety function.

Picture 5

4. Adjust the gear:

First set the rear derailleur to position the chain on the 5th sprocket and the front derailleur to position the chain on the small chainring.

Press the button on the cockpit junction box until the red LED lights up to switch the rear derailleur to setting mode. Please note that if you continue to hold the button after the red LED lights up, the system will start to reset the safety function.

Picture 6


Canyon consistently strives to ensure the quality and accuracy of the information contained in this Technical Support Center. Any repairs or adjustments which you carry out on your bike are entirely at your own risk. If you are in any doubt about what to do, you should send your bike to Canyon or take it to another qualified repair specialist. Canyon gives no guarantee or accepts no liability for the any of the information contained in this Technical Support Center.

Picture 1: Press the rocker switch

Picture 1: Press the rocker switch

Picture 2: Green light on junction box

Picture 2: Green light on junction box

Picture 3: Red light on junction box

Picture 3: Red light on junction box

Picture 4: Charging cable on junction box

Picture 4: Charging cable on junction box

Picture 5: Safety button

Picture 5: Safety button

Picture 6: Red light on junction box to adjust gearshift

Picture 6: Red light on junction box to adjust gearshift

Did this article help you?yesno

Pure Cycling.