Desafortunadamente, no enviamos a tu país.

SERVICE CHAT TALK TO THE PEOPLE THAT BUILD YOUR BIKE:

CHAT IS NOT AVAILABLE RIGHT NOW. WE WILL BE BACK ONLINE SOON.

Hoy estamos abiertos hasta las 17:00: +34 902 995 045
Difucultad: Fácil
Estos trabajos son sencillos para cualquiera interesado en el ciclismo. Para esta reparación el cliente no necesita ninguna herramienta, o tan sólo herramientas estándar como llaves Allen, alicates o destornilladores. En esta categoría encontrarás todo loque necesitas para ajustar tu bicicleta.
Herramientas: Temas similares: Imprimir artículo

Remedy for cracking sounds and noises

Este artículo en español

Noises can occur where parts join, for example on weld seams or screw joints. Carbon fibre frames might emit very loud noises, although these can normally be located and eliminated very quickly and easily.

1. Pedals

Disassemble the pedals and apply grease to the threads.
Picture 1 Re-tighten the pedals after the first ride. You need to check, if the screws of the shoe-cleats are tightened with the correct torque. Apply some grease to the cleats and replace worn out cleats at an early stage. If the pedals have screws, apply some grease to this contact point to avoid creaking.Picture 2

You need to replace worn out cleats at an early stage.

2. Quick Releases

Make sure that the quick releases are closed and tightened with sufficient force.
Picture 3 Make sure that through axles are correctly closed and greased.

3. Saddle and Seatpost

Check if the seat clamp is tightened with the correct torque. You should check as well if the seat post is sufficiently inserted into the seat tube. There should be enough grease on the post if frame and post are made of aluminium. If the seatpost or frame are made of carbon fibre, do not apply grease to either of these components. Instead, use carbon assembly paste.

You need to check the head of the seatpost as well.
Picture 4 Seatposts with a head made of titanium are liable to creaking sounds. You can prevent noises by spraying wax on this contact point.

4. Rear Derailleur Hanger

The rear derailleur hanger is often the source of noises. Dismantle the hanger and apply grease to the contact surfaces.
Picture 5

5. Cockpit

Check if stem, brake levers, and gear shifters are tightened with the correct torque. Only apply carbon assembly paste to parts which are made of carbon fibre.
Picture 6

If your shift cables are positioned inside the frame, there might be noise from the point where the cables enter the frame. Apply some grease to these contact points.

7. Bottle and Bottle Holder

Check if the bottle cage screws are tightened with the correct torque.

8. Chainring Screws

Check if the chainring screws are tightened with the correct torque as well.
Picture 7

Ensure that all bolts and screws are tightened to the correct torque. The correct torque is indicated on the component itself, in the bike manual provided with your new bike, or here in the Technical Support Center. .

In many cases, noises can come from defects on the frame or fitted components. Check your entire bike carefully for cracks or other damage.

Canyon está en constante evolución para garantizar que la calidad y la precisión de la información contenida en este Centro de Soporte Técnico. Cualquier reparación o ajustes que realices en tu bicicleta está bajo tu entera responsabilidad. Si tienes cualquier duda acerca de lo que debes hacer, deberías enviar tu bici a Canyon o llevarla a cualquier taller especializado. Canyon no garantiza o aceptará responsabilidades sobre la información contenida en este Centro de Soporte Técnico.


Picture 1: Apply grease to the thread on the cranks

Picture 1: Apply grease to the thread on the cranks

Picture 2: Apply grease to the click pedals

Picture 2: Apply grease to the click pedals

Picture 3: The quick releases must be correctly tightened

Picture 3: The quick releases must be correctly tightened

Picture 4: Check if the screws on the saddle railings are correctly tightened

Picture 4: Check if the screws on the saddle railings are correctly tightened

Picture 5: Apply grease to the rear derailleur hanger

Picture 5: Apply grease to the rear derailleur hanger

Picture 6: Check the screws on the stem

Picture 6: Check the screws on the stem

Picture 7: Check if the chainring screws are correctly tightened

Picture 7: Check if the chainring screws are correctly tightened

¿Te ha ayudado este artículo?SiNo

Pure Cycling.