Nous ne livrons malheureusement pas dans ce pays.

SERVICE CHAT TALK TO THE PEOPLE THAT BUILD YOUR BIKE:

CHAT IS NOT AVAILABLE RIGHT NOW. WE WILL BE BACK ONLINE SOON.

Notre Service center sera à nouveau disponible demain à 9.00 heures. Envoyez-nous un e-mail.
Difficulté: facile
Ces travaux sont faciles pour quiconque s'intéresse au vélo. Pour cet atelier, l'utilisateur n'a besoin d'aucun outil, soit d'outils standard tels que des clés Allen, pinces ou tournevis. Dans cette catégorie, vous trouverez ci-dessus, comment effectuer les réglages pour votre vélo.
Outils: Sujets similaires: Impression de l'article

Remedy for cracking sounds and noises

Cet article en Français

Noises can occur where parts join, for example on weld seams or screw joints. Carbon fibre frames might emit very loud noises, although these can normally be located and eliminated very quickly and easily.

1. Pedals

Disassemble the pedals and apply grease to the threads.
Picture 1 Re-tighten the pedals after the first ride. You need to check, if the screws of the shoe-cleats are tightened with the correct torque. Apply some grease to the cleats and replace worn out cleats at an early stage. If the pedals have screws, apply some grease to this contact point to avoid creaking.Picture 2

You need to replace worn out cleats at an early stage.

2. Quick Releases

Make sure that the quick releases are closed and tightened with sufficient force.
Picture 3 Make sure that through axles are correctly closed and greased.

3. Saddle and Seatpost

Check if the seat clamp is tightened with the correct torque. You should check as well if the seat post is sufficiently inserted into the seat tube. There should be enough grease on the post if frame and post are made of aluminium. If the seatpost or frame are made of carbon fibre, do not apply grease to either of these components. Instead, use carbon assembly paste.

You need to check the head of the seatpost as well.
Picture 4 Seatposts with a head made of titanium are liable to creaking sounds. You can prevent noises by spraying wax on this contact point.

4. Rear Derailleur Hanger

The rear derailleur hanger is often the source of noises. Dismantle the hanger and apply grease to the contact surfaces.
Picture 5

5. Cockpit

Check if stem, brake levers, and gear shifters are tightened with the correct torque. Only apply carbon assembly paste to parts which are made of carbon fibre.
Picture 6

If your shift cables are positioned inside the frame, there might be noise from the point where the cables enter the frame. Apply some grease to these contact points.

7. Bottle and Bottle Holder

Check if the bottle cage screws are tightened with the correct torque.

8. Chainring Screws

Check if the chainring screws are tightened with the correct torque as well.
Picture 7

Ensure that all bolts and screws are tightened to the correct torque. The correct torque is indicated on the component itself, in the bike manual provided with your new bike, or here in the Technical Support Center. .

In many cases, noises can come from defects on the frame or fitted components. Check your entire bike carefully for cracks or other damage.


Canyon s'efforce constamment d'assurer la qualité et l'exactitude des informations contenues dans ce support technique. Les réparations ou réglages que vous effectuez sur votre vélo sont sous votre entière responsabilité. Si vous avez le moindre doute sur ce qu'il faut faire, envoyez votre vélo chez Canyon directement ou chez un vélociste qualifié. Canyon ne donne aucune garantie ou n'accepte aucune responsabilité quant aux informations contenues dans ce support technique.


Picture 1: Apply grease to the thread on the cranks

Picture 1: Apply grease to the thread on the cranks

Picture 2: Apply grease to the click pedals

Picture 2: Apply grease to the click pedals

Picture 3: The quick releases must be correctly tightened

Picture 3: The quick releases must be correctly tightened

Picture 4: Check if the screws on the saddle railings are correctly tightened

Picture 4: Check if the screws on the saddle railings are correctly tightened

Picture 5: Apply grease to the rear derailleur hanger

Picture 5: Apply grease to the rear derailleur hanger

Picture 6: Check the screws on the stem

Picture 6: Check the screws on the stem

Picture 7: Check if the chainring screws are correctly tightened

Picture 7: Check if the chainring screws are correctly tightened

Cet article vous a-t-il aidé ?ouinon

Pure Cycling.