- Strive CF
- Strive AL
- Spectral CF
- Spectral AL 29
- Spectral AL
- Nerve AL 29
- Nerve AL
- Lux CF 29
- Grand Canyon CF SLX 29
- Grand Canyon CF SL 29
- Grand Canyon CF 29
- Grand Canyon AL SLX 29
- Grand Canyon AL 29
- Yellowstone AL 29
- Dude CF
Desværre, så sender vi ikke til dit land
SERVICE CHAT TALK TO THE PEOPLE THAT BUILD YOUR BIKE:
CHAT ER IKKE TILGÆNGELIG LIGE NU. VI ER SNART ONLINE IGEN.
In principle, it is possible to exchange the shock on every Canyon mountain bike. The new shock must have the same compression length and the same fitting length as the old one. Check at any rate that the damper has enough space to move at any possible position. The bushing size for all Canyon bikes is Canyon ist 8x22,2 mm.
The fitting length of the shock is measured from the exact center of each of the shock eyes.
If you do decide to change your shock, then you will require new bushings from the relevant shock manufacturer.
The Nerve bushing size is M8x35.0mm.
Originally assembled dampers on the Canyon Strive can not be replaced or changed by any other damper whatsoever!
If the damper has a piggy back make sure that the piggy back does not touch the frame or any other part of the bicycle under no matter how far the damper is deflected.