Cable Routing Reverb Stealth

Picture 1: Cable routing for Nerve CF 26"

Picture 1: Cable routing for Nerve CF 26"

From Model year 2014

All full suspension models (apart from Torque DHX) are compatible with the Rock Shox Reverb Stealth. The cable passes through an opening in the seat post near the bottom bracket and then runs on the outside of the bottom tube to the handlebar.

On the Nerve CF and Lux CF the Rock Shox Reverb Stealth cable is routed completely inside the frame as shown. Picture 1

On the Torque DHX the cable for the saddle remote can be routed through the top tube.

Model year 2013

The Rock Shox Reverb Stealth can be fitted on the Spectral AL and CF, Strive AL and CF, Torque EX, Nerve AL+ , Nerve AL 29 Inch and Torque FRX models. The cable passes through an opening in the seat post near the bottom bracket and then runs on the outside of the bottom tube to the handlebar.

On the Nerve CF the Rock Shox Reverb Stealth cable is routed completely inside the frame as shown. Figure 1

The Stealth version cannot be fitted to the Nerve AL 26 Inch. On this model you can fit the standard Rock Shox Reverb (with external remote).
On the Torque DHX and Torque EX the cable for the saddle remote from other post manufacturers can be routed through the top tube.