Strive CF 9.0

add to cart
+ Packaging & Shipping / incl. VAT
Availability

Highlights

The Strive CF 9.0 provides a rare mix of adaptability and efficiency that sets it apart from any other full suspension trail and enduro bike. This is a lightweight carbon frame with an aggressive Race Geometry that is defined by a longer stack and reach to guarantee a stable and quiet ride even on the most turbulent downhill sections. As if by magic, you think you’ll have started out on an enduro bike with XC racer qualities only to have it turn into a downhill machine at the push of a button. The powerful Fox Factory 36 Float suspension fork with 170 mm of travel will withstand the roughest trails with agile responsiveness. The Fox Factory Float X EVOL shock absorber with and extra-large air chamber perfectly unites with the bike and feels like they are made for one another. The SRAM X01 Eagle with 12-speed drivetrain will amaze every MTB purist. The extremely warp-resistant cassette with a huge bandwidth not only gives the bike a clean look but also always keeps the right gear at the ready. The internal cable routing keeps the lines clean and eliminates rattling with the clever method of winding the cables snuggly through the tubes. DT Swiss EX 1501 Spline are heavy-duty endure wheels that ride and accelerate like XC racers. Tubeless ready, the front comes with a 30 mm wide rim in order to accommodate a wider tire for maximum traction while the rear wheel has a narrower 25 mm rim for a thinner tire that will roll really well with a direct trail feel at a higher pressure. If you are looking to buy a race-oriented full suspension enduro MTB, you could hardly do better than the Strive CF 9.0.

Components

  • Rear Shock Fox Fox Factory Float DPX2
  • Fork Fox 36 Float Factory
  • Headset Acros Bloc Loc
  • Derailleur Hanger Derailleur Hanger No. 26
  • Chain guide MRP V3 S3
  • Brakes SRAM Code RSC
  • Wheelset DT Swiss EX 1501 Spline, 30 | 25 mm
  • Chainrings 34
  • Chain SRAM XO1 Eagle
  • Bottom Bracket SRAM GXP
  • Grips Canyon G5
  • Saddle SDG FLY MTN
  • Pedals none included
  • Frame sizes XS, S, M, L, XL
  • Colour stealth | factory racing
  • Weight 13,7 kg (Size M )
  •  
  • included in delivery
  • Frame protection Canyon Frame protection
  • Accessories Canyon Organza Bag, Canyon Tool Case, Carbon Assembly Paste, Reflector Set

Subject to technical modification without notice. Errors and omissions excepted.

Geometry

geometrie
Frame size XS S M L XL

Height (cm) 155-163
163-170
170-178
178-187
187-198
A
Saddle Height (mm) 635-735
670-777
695-827
725-857
765-897
B
Seat tube length 388
430
430
460
500
C
Top tube length 576
600
629
648
658
D
Head tube length 95
115
125
135
155
E
Head tube angle 66 [+1,5°]
F
Seat tube angle 73,5° [+1,5°]
G
Chainstay length 423
H
Wheel base 1132
1158
1188
1207
1240
I
Stack 592
606
615
627
643
J
Reach 402
422
448
468
487
L
Bottom bracket Offset 340 [+19]

Spacer 20

Stem length 40
40
50
50
50

Handlebar width 780

Crank length 170

Seat post diameter 30,9

Seat post length 390
390
440
440
440

Wheel size 27,5"

BIKE CLASSIFICATION: This category includes all bikes from categories 1-3. In addition it includes use on very harsh, obstacle-scattered terrain with steep gradients and consequently higher speeds. Regular, moderate jumps pose no problem for experienced riders when using these bikes. Extended and regular use in bike parks and when tackling “North Shore” sections should be avoided. Due to increased stresses, these bikes should be checked for damage after every ride. Full suspension bikes with mid-level travel are typical in this category.

We’re In Control

Our business model gives us the advantage of knowing exactly where our products come from, how they are made and what they are capable of. Canyon products are exclusively available at Canyon.com, so you can trust the quality you are getting.