What can I do to make my carbon bike last as long as possible?
If you take note of the following advice, then you will be able to keep riding your Canyon problem-free for years to come:
-
If you mount carbon parts, or screw parts to a carbon frame, always pay attention to the torques with which the screws must be tightened. You will find the correct torques in the user manual of your Canyon.
-
Carbon parts do not have unlimited durability. Therefore stems and handlebars should be exchanged for new parts at regular intervals. The maximum service life of the components can be found in the respective manufacturers' manuals.
-
Do not use grease when mounting, but only special carbon assembly paste.
-
Clean carbon only with a soft, dry cloth, water or mild soapy water and then seal the surface with hard wax.
-
Make sure that carbon handlebars are approved for mounting parts such as bar ends. Time trial attachments must not be mounted on carbon handlebars unless expressly approved by Canyon.
Ansvarsfraskrivelse
Canyon forsøker hele tiden å sikre kvaliteten og nøyaktigheten i den informasjonen som legges ut her i Teknisk Support Senter. Likevel er alle reparasjoner og justeringer som du utfører på egen risiko. Er du i tvil med hensyn til hvordan du skal gjøre det, anbefaler vi deg å sende sykkelen til Canyon eller levere den til et kvalifisert sykkelverksted. Canyon gir ingen garantier og tar ikke ansvar for den informasjon som legges ut her i Teknisk Support Senter.
Innholdet lastes
