Desafortunadamente, no enviamos a tu país.mira a que países enviamos
In principle, it is possible to exchange the shock on every Canyon mountain bike. The new shock must have the same compression length and the same fitting length as the old one. The bushing size for all Canyon bikes is M8.
The fitting length of the shock is measured from the exact center of each of the shock eyes.
If you do decide to change your shock, then you will require new bushings from the relevant shock manufacturer.
The Nerve bushing size is M8x35.0mm.
If the damper has a piggy back make sure that the piggy back does not touch the frame or any other part of the bicycle under no matter how far the damper is deflected.