Unfortunately, we do not ship to your country.



Our Servicecenter is available today from 08:00. You can reach us on +49 261 40 4000 or send us an e-mail.
Difficulty: medium
In this category you’ll find workshops that are certain to be of interest to the passionate manic mechanic. You’ll need to have a certain level of technical skill and have already some experience in carrying out maintenance work on sports cycles. For jobs in this category you may need special tools, which are not normally available in standard tool boxes.
Similar Topics: Print Article

Attaching of shifting cables to Aeroad CF frame

The bowden cables of the Aeroad CF are routed inside the frame. This reduces the air drag and the cables are covered from water and dirt. This is how you route the cables inside the frame:

1. The Aeroad CF has built in Liner (long thin plastic tubes). These liners facilitate the routing of the cables inside the frame. They are only to be used to route cables, they do not replace GoreTex cable housings. One bowden cable runs from the left shift lever to the right side of the down tube and the cable of the right shift lever runs to the left side of the down tube.

2. Push the bowden cables through the appropriate liner. Both cables cross inside the down tube. The cable exits the bottom bracket on the side of chainwheel. The cable for the front derailleur exits on the other side of the bottom bracket.

3. Pull both liners out of the down tube. You should keep the liner.

4. Thread the cable through the cable guide fixed underneath the bottom bracket.

5. Now you push the bowden cable for the rear derailleur through the liner inside the chainstay.

6. Pull the liner out of the chainstay. Attach the cable to the rear derailleur.

Ensure that all bolts and screws are tightened to the correct torque. The correct torque is indicated on the component itself, in the bike manual provided with your new bike, or here in the Technical Support Center.

Canyon consistently strives to ensure the quality and accuracy of the information contained in this Technical Support Center. Any repairs or adjustments which you carry out on your bike are entirely at your own risk. If you are in any doubt about what to do, you should send your bike to Canyon or take it to another qualified repair specialist. Canyon gives no guarantee or accepts no liability for the any of the information contained in this Technical Support Center.

Did this article help you?yesno

Pure Cycling.